| 
 | 
8#
 
 
 楼主 |
发表于 2023-11-28 21:03:19
|
只看该作者
 
 
 
 
我也不清楚怎样 全程组raid0 容量不够时候还是很卡 
 
- smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.5.7] (local build)
 
 - Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
 
  
- === START OF INFORMATION SECTION ===
 
 - Model Family:     Western Digital Re
 
 - Device Model:     WDC WD2000FYYZ-01UL1B1
 
 - Serial Number:    WD-WMC1P0210064
 
 - LU WWN Device Id: 5 0014ee 0591217c9
 
 - Firmware Version: 01.01K02
 
 - User Capacity:    2,000,398,934,016 bytes [2.00 TB]
 
 - Sector Size:      512 bytes logical/physical
 
 - Rotation Rate:    7200 rpm
 
 - Device is:        In smartctl database 7.3/5319
 
 - ATA Version is:   ATA8-ACS (minor revision not indicated)
 
 - SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
 
 - Local Time is:    Tue Nov 28 14:02:15 2023 CET
 
 - SMART support is: Available - device has SMART capability.
 
 - SMART support is: Enabled
 
  
- === START OF READ SMART DATA SECTION ===
 
 - SMART overall-health self-assessment test result: PASSED
 
  
- General SMART Values:
 
 - Offline data collection status:  (0x84) Offline data collection activity
 
 -                                         was suspended by an interrupting command from host.
 
 -                                         Auto Offline Data Collection: Enabled.
 
 - Self-test execution status:      (   0) The previous self-test routine completed
 
 -                                         without error or no self-test has ever 
 
 -                                         been run.
 
 - Total time to complete Offline 
 
 - data collection:                (25800) seconds.
 
 - Offline data collection
 
 - capabilities:                    (0x7b) SMART execute Offline immediate.
 
 -                                         Auto Offline data collection on/off support.
 
 -                                         Suspend Offline collection upon new
 
 -                                         command.
 
 -                                         Offline surface scan supported.
 
 -                                         Self-test supported.
 
 -                                         Conveyance Self-test supported.
 
 -                                         Selective Self-test supported.
 
 - SMART capabilities:            (0x0003) Saves SMART data before entering
 
 -                                         power-saving mode.
 
 -                                         Supports SMART auto save timer.
 
 - Error logging capability:        (0x01) Error logging supported.
 
 -                                         General Purpose Logging supported.
 
 - Short self-test routine 
 
 - recommended polling time:        (   2) minutes.
 
 - Extended self-test routine
 
 - recommended polling time:        ( 281) minutes.
 
 - Conveyance self-test routine
 
 - recommended polling time:        (   5) minutes.
 
 - SCT capabilities:              (0x70bd) SCT Status supported.
 
 -                                         SCT Error Recovery Control supported.
 
 -                                         SCT Feature Control supported.
 
 -                                         SCT Data Table supported.
 
  
- SMART Attributes Data Structure revision number: 16
 
 - Vendor Specific SMART Attributes with Thresholds:
 
 - ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 
 -   1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
 
 -   3 Spin_Up_Time            0x0027   177   172   021    Pre-fail  Always       -       6116
 
 -   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       55
 
 -   5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
 
 -   7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
 
 -   9 Power_On_Hours          0x0032   001   001   000    Old_age   Always       -       76127
 
 -  10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 
 -  11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 
 -  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       27
 
 - 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
 
 - 192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       12
 
 - 193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       116
 
 - 194 Temperature_Celsius     0x0022   116   111   000    Old_age   Always       -       34
 
 - 196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
 
 - 197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
 
 - 198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
 
 - 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
 
 - 200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
 
  
- SMART Error Log Version: 1
 
 - No Errors Logged
 
  
- SMART Self-test log structure revision number 1
 
 - Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
 
 - # 1  Extended offline    Completed without error       00%     30156         -
 
 - # 2  Extended offline    Completed without error       00%     30139         -
 
 - # 3  Extended offline    Completed without error       00%     26397         -
 
 - # 4  Extended offline    Completed without error       00%     26380         -
 
 - # 5  Extended offline    Completed without error       00%     26364         -
 
 - # 6  Extended offline    Completed without error       00%     26347         -
 
 - # 7  Extended offline    Completed without error       00%     25426         -
 
 - # 8  Extended offline    Completed without error       00%     25409         -
 
 - # 9  Extended offline    Completed without error       00%      2740         -
 
 - #10  Extended offline    Completed without error       00%      2663         -
 
 - #11  Extended offline    Completed without error       00%        21         -
 
 - #12  Extended offline    Completed without error       00%         4         -
 
  
- SMART Selective self-test log data structure revision number 1
 
 -  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
 
 -     1        0        0  Not_testing
 
 -     2        0        0  Not_testing
 
 -     3        0        0  Not_testing
 
 -     4        0        0  Not_testing
 
 -     5        0        0  Not_testing
 
 - Selective self-test flags (0x0):
 
 -   After scanning selected spans, do NOT read-scan remainder of disk.
 
 - If Selective self-test is pending on power-up, resume after 0 minute delay.
 
 
  复制代码 
 |   
 
 
 
 |